1. Vacuum
Vacuuming is the most basic task of carpet maintenance and must be done every day. It is best to vacuum each part twice. The first time is to suck against the pile of the carpet. Although it is strong, it can be completely vacuumed. The second time is to suck along the carpet pile to restore the original pile guide. , To avoid pile disorder, causing carpet color difference. It should be emphasized that no matter how many times the carpet is vacuumed, the last time it must be sucked down the pile.
Carpets in public areas should be vacuumed with a rotary pile vibrator for daily vacuum cleaning. The vibrator usually includes one or more brush strips, which can more effectively remove dust on the surface or deep in the blanket. Starting from the day the carpet is used, make sure to vacuum thoroughly every day. Do not have the idea of thoroughly vacuuming the carpet tomorrow. Once the dust deposits, it is difficult to remove it by daily vacuuming.
The carpet is a woolen textile, and after the down-cutting process, it is normal for new carpets to have a small amount of floating hair and sheared hairs when used. Therefore, new carpets should be vacuumed twice a day, morning and evening, and floating after one month. Can be eliminated. Carpet cleaning
Regular washing of carpets in different areas can restore the original appearance of the carpet and extend its service life. There are two basic methods for carpet cleaning, one is dry cleaning and the other is wet cleaning. No matter which method is used to wash the carpet, it is only suitable for professionals who have received good vocational training to do this work.
2. Dry cleaning
There are two methods for dry cleaning carpets:
*Foam dry cleaning
It is the most common type of carpet surface foam cleaning. The foam dry cleaning machine uses a rotating brush and an implanted wet vacuum suction head to spray a large amount of detergent on the carpet pile. Under the action of the rolling brush, the detergent After cleaning the pile, use a vacuum cleaner to absorb the washing foam and suspended dust.
*Dry extraction method
In the method, a mixture of solvent, emulsifier, water and detergent is sprayed on the surface of the carpet manually or in a dispensing container, brushed into the carpet pile by washing equipment, and rotated for 30 minutes, and then the detergent and dust are absorbed.
Dry cleaning is a surface cleaning, which can effectively restore the surface of the carpet, but it does not remove the dirt hidden in the carpet. It must be cleaned thoroughly.
3. Wet wash
When the oil stains and other sticky substances of the carpet are obviously accumulated, and the accumulation of dust and dirt has affected the color of the carpet and the resilience of the carpet pile, and the dry cleaning method cannot be eliminated, the carpet should be wet washed, that is, thoroughly cleaned.
There are two ways to wet carpet:
*Squirt cleaning method
The method is to spray hot water and detergent onto the carpet under pressure. Under the action of water and detergent, use a carpet washing equipment equipped with a rotating or oscillating brush to separate the dirt from the fibers and then suck it away.
*Steam cleaning method
This is a very effective way to remove the dirt embedded in the pile of the carpet and the dirt on the surface of the carpet, and the most thorough carpet washing method. Also called extraction cleaning method. Use a special steam dry carpet machine to release a steam solvent composed of a mixture of water and cleaning fluid sprayed on the carpet, and then agitated by a mechanical swinging brush, so that the dirt is separated from the carpet fiber and suspended in the solvent, and is sucked by an implanted vacuum. Head cleared.